|
Product cross reference
Designed to meet the requirements of spot, projection, seam and portable
gun welding applications. State-of-the-art construction makes the WS500 the ultimate
economy welding control.
 
| Spot, projection, seam and portable
gun welder compatibility |
| Extremely compact allowing
installation in a variety of new and retrofit applications |
| Suitable for robot, multiweld or
manual weld operations |
| 50/60 Hz operation |
| 24V I/O |
| Up to 8 programs |
| 4 inputs and 4 outputs |
| Alternate ½ cycle welding |
| Phase angle control |
| Configurable welding modes |
| Supports weld cross interlock |
| Weld counter |
| End of sequence output |
| Very easy to use and set up |
| WS700 Now available with brakeshoe and drum welding sequences |
Designed to meet the requirements of conventional AC and
medium frequency DC spot, projection, seam and portable gun welding applications, the
WS700 has the additional benefit of weld monitoring integrated into the control.
State-of-the-art construction makes WS700 a most economical welding control..
| AC/medium frequency/brakeshoe/drum
welder control |
| WS98 compatible |
| Weld monitoring for improved process
control |
| MF technology allows the use of
smaller transformers |
| Spot, projection, seam and portable
gun welder compatibility |
| Compact design allows installation
in a variety of applications |
| Suitable for robot, multiwelder or
manual applications |
| 24V I/O |
| Up to 64 programs |
| 16 inputs and 8 outputs |
| Configurable welding modes |
| Weld counter |
| End of sequence output |
| Very easy to use and set up |
| Proportional valve control for
electrode pressure |
| RS232 port |
| Analogue input (pressure transducer,
etc.) |
| Inverter diagnostics |
This range of controls offers many advanced features.
Intended for the user who requires something more than a basic control, but not the
fullest possible range of features. The WS1000 series of controls combines advanced design
with the latest production technology in providing both the flexibility and solid
reliability to fulfill modern manufacturing requirements.
| Phase angle, constant current or
voltage compensation modes |
| Available in panel or chassis
mounting format |
| Integral programming options |
| Phase angle mode |
| Constant current with monitoring
facilities |
| Advanced design using latest
technology |
| Solid reliability |
| 50/60 Hz operation |
| 24V I/O |
| Firmware updateable using RS232
interface |
| Single/dual gun |
| Tip dressing |
| 64 Programs |
| Data logging |
| Advanced stepping |
| WS98 compatible |
This quality range of controls features high performance
16-bit technology combined with cost efficient construction to deliver a low cost, high
specification solution which is easy to use and maintain. Extensive software features make
the WS2000 and WS2020 two of the most flexible and cost effective solutions available.
 
| Central communications (RS485) |
| Phase angle or constant current
operation |
| 3 phase drive option |
| Extended I/O options |
| Pendant programming |
| Auto 50/60 Hz options |
| 16 programs |
| Supports dual gun operation |
| Advanced weld sequence |
| Analogue pressure control |
| Heat stepping |
| Batch counters |
| Compatible with monitoring systems |
| Data card storage option |
The demanding environment of the automotive industry has brought about a
wide range of innovative features in resistance welding controls. Many of the features
found in the 40XX series have evolved from high level automation installations involving
robots and multi-welders. This results in an extremely flexible control system, lending
itself to any resistance welding application.
| Advanced process
control |
| Wide range of
fieldbus interfaces |
| Optional Ethernet,
ControlNet or ProfiBus-FMS network interfaces |
| Phase angle,
constant current or voltage compensation modes |
| Programmed with WS98
software |
| Optional front panel
programmer |
| Medium frequency
(DC) compatible |
| Three phase
operation |
| Available in
multiple configurations |
| Constant current
with monitoring facilities |
| Firmware updateable using RS232
interface |
| Advanced design
using latest technology |
| 50/60 Hz Operation |
| Up to 192 programs |
| Up to 24 electrodes |
| Advanced stepping
and dressing |
| WS98 compatible |
DST72/1 is an advanced, low cost, versatile welding
control suitable for use in a wide variety of resistance spot welding applications.
| Very simple programming system |
| Simple construction |
| Two programs |
| 50/60 Hz operation |
| Dual weld pulse for coated material |
The MTR welding control is a compact low-cost timer with
a simple, intuitive setup for basic welding machines.
| Ease of use |
| Basic/Advanced programming modes |
| 10 weld programs |
| Integral programmer |
| 0 to 50 cycles of weld |
| 50/60 Hz operation |
| Non-interlocked weld sequence |
| Low-profile case |
| Simple connections |
| Active adjustment of parameters
between welds |
| Visual feedback of weld on/off |
| Back-lit display |
Designed as a replacement for our successful T4,S4 and S5 timers, the A1/T1 controls
offer backwards compatibility with the advantages of cutting edge technology. The A1/T1
provides enhanced features to ensure efficient, low maintenance production.
| Can be used as replacement for many
legacy British Federal control systems |
| Spot, projection, seam and portable
gun welder compatibility |
| Compact design allows installation
in a variety of applications |
| Suitable for robot, multiwelder and
manual applications |
| 50/60 Hz operation |
| 24V I/O |
| Up to 15 programs |
| 24V DC, 110V AC or 440V AC operation |
| 4 inputs and 4 outputs |
| Configurable welding modes |
| Supports cross weld interlock |
| Weld counter |
| End of sequence output |
| Very easy to use and set up |
| Phase angle control |
The WPT4 weld timer is designed to control resistance welding machines during critical
applications involving short weld times or hard to weld materials.
| Microprocessor based timer |
| Power factor adjustment |
| End of weld signal |
| 50/60 Hz operation |
| 110V to 415V AC operation |
The WP/2 Weld Timer, operating in conjunction with a
suitable thyristor provides for precision synchronous timing control to suit pedal, spot
or manually operated welding machines.
| Easy set up |
| Calibrated heat control |
| Weld on/off switch |
The DP4 process timer is intended as a replacement/upgrade to the older DP2/3/EP1 range
of timers from British Federal.
| DP2/3/EP1 replacement to maintain
your investment |
| 4-channel timing (DP4 mode) |
| One-shot, delay, cascade or
cross-interlock fucntions (DP4 mode) |
| 50/60 Hz operation |
| 0.1 to 99 minutes timing |
Copyright © 2007 BF ENTRON Ltd.. All rights
reserved.
webmaster@bfentron.co.uk
|
 |
